103
Static IP Address Configuration
Configuring RUMBA for a static IP address requires configuring both RUMBA and FastLink II for the same
static IP address.
To configure RUMBA for a static IP address:
1
Run the RUMBA configuration utility by clicking on the TCP/IP Configuration icon in the
RUMBA Windows group.
2
Click on
[Stack]
in the TCP/IP Configuration dialog box.
3
In the dialog box entitled MultiNet Configuration click on
[Modify]
.
4
Set the Subnet Mask field to your IP subnet mask.
5
Enter your static IP address in the IP Address field.
6
Make sure the Enable Interface box is checked, and that your Driver Choice is set to ODI.
7
Make sure your Gateway is addressed by clicking on the Routing tab in the MultiNet Configuration
dialog box. Enter the gateway address in the Default Route field.
8
After you make your changes press [Done].
To configure FastLink II for a static IP address:
1
Run FastLink II, and select the Connections button at the left of the screen. Highlight the Connect
drop-down box, and select the connection whose settings you want to set for your IP connection.
2
Click on the
[IP Protocol Settings]
button, and check the Static IP address button.
3
Highlight the Address field and enter your static IP address.
