Baroness GM1700, Руководство по обслуживанию

Страница: 113 / 192

Throttle wire
Adjustment of Throttle Wire
Movement of the lever may become dull due
to frequent use, play of the inner wire may
change and the inner wire may be stretched
depending on R angle of the outer wire.
Inspect them and, if necessary, implement
adjustment etc.
Pull the adjustment bolt of the throttle lever
to 10 mm (0.39 in) from the upper face of
the main body stay and secure it with a lock
nut.
5
3
1
4
2
6v3fj3-014
Adjustment of Throttle Wire_001
1 Throttle wire
2 Adjustment bolt
3 Lock nut
4 Main body stay
5 Throttle lever
Start the engine, and check that the engine
rpm is 1,200 rpm when the throttle lever is
"Low."
Lower the throttle lever until it stops in the
"High" position.
1
6v3fj3-015
Adjustment of Throttle Wire_002
1 Throttle lever
1.
2.
3.
Shift the throttle lever to the maximum rpm,
adjust the engine rpm to 2,800 rpm by the
adjustment bolt, and secure it with the lock
nut.
Confirm that there is a clearance (arrow)
between the stopper for maximum rpm and
the linkage at the maximum rpm.
Confirm that there is a play in the throttle
wire when the throttle lever is "Low."
6
3
7
5 4
2
1
6v3fj3-016
Adjustment of Throttle Wire_003
1 Stopper for maximum rpm
2 Linkage
3 Throttle wire (inner)
4 Main body stay
5 Adjustment bolt
6 Lock nut
7 Throttle wire (outer)
Toe Angle
Adjustment of Toe Angle
Due to damage to the tie rod and rod ends, it
may become difficult to properly handle the
machine.
Inspect them and, if necessary, implement
adjustment etc.
Adjust the pneumatic pressure of the tire to
specified pressure. (See "Tire Pneumatic
Pressure" (Page 6-2) .)
FRONT
A
B
ufr7l4-001
Adjustment of Toe Angle_001
4.
5.
6.
1.
Main body
GM1700
Main body
Page 6-9
Adjustment