Baroness GM1700, Руководство по обслуживанию

Страница: 37 / 192

General instructions
Hydraulic hose
Hydraulic hoses are subjected to excessive
load when weathered, exposed to the sun or
chemicals, stored in a very hot storage
environment, or handled roughly during
operation or maintenance work. These factors
may cause damage to hoses or facilitate their
deterioration. Since a hydraulic hose is more
sensitive to external conditions than other
components, check it frequently for damage,
deterioration or the like of.
When replacing the hydraulic hose, check that
the hose is straight (not twisted before fitting).
When replacing the hydraulic hose, use two
wrenches. First, support the hose at a
designated point with the first wrench. Next,
fasten the hose swing nut to the fitting with the
second wrench.
vuy27z-001
Hydraulic hose_001
Warning
Be sure to depressurize the hydraulic system
before maintaining or repairing it.
Stop the engine, and lower the rake.
When checking for pinhole leakage of the
hydraulic circuit or oil leakage of the nozzle,
search for a leakage point using something
like paper or cardboard, never with your bare
hands. Be careful about high-pressure oil
which may pierce your skin, resulting in
physical injury.
Hydraulic fitting
Bite type tube fitting
Preliminary tightening (Preset)
Cut the tube at the designated length at a
right angle.
w7s31b-001
Bite type tube fitting_001
Remove burrs on the inside and outside of
the tube with a file or the like of.
w7s31b-002
Bite type tube fitting_002
Insert the nut and sleeve into the tube.
Note the direction of the sleeve.
1
2
w7s31b-003
Bite type tube fitting_003
1 Sleeve
2 Nut
1.
2.
3.
Hydraulic system
GM1700
Hydraulic system
Page 4-9
General instructions