Baroness GM1700, Руководство по обслуживанию

Страница: 159 / 192

Follow the same steps to complete the
installation on the opposite side by the
same procedure.
1
2
3
5is35y-009
Inspection of Rear Wheel of Center Deck_009
1 Washer
2 Wheel tightening washer
3 Bolt and spring washer
Inspection of Caster Wheel
Wear of bearing due to frequent use and/or
damage of bearing etc. caused by invasion
of water may prevent smooth rotation of the
rubber wheel. Inspect and replace the parts
such as bearing.
Make sure that there is no abrasion or
adhesion of the rubber wheel.
Make sure that there is no wear of the
collar, or washer etc. on both ends.
Make sure that there is no crack, bent, or
wear on the front wheel arm, shaft, or front
wheel shaft.
Make sure that there is no wear, scratch,
crack, etc. on the front wheel arm bushing.
Make sure that there is no wear or rusting
of the bearing.
Make sure that there is no play in the fit of
the front wheel shaft of the front wheel
arm and the bearing.
Make sure that there is no wear of the
copper washer or iron washer of the front
wheel arm shaft.
Danger Danger
The rotary knife is an edged tool.
Handle it carefully, since it could cut your
hands or legs.
[8]
￭
･
･
･
･
･
･
･
Caution
Wear gloves when touching edged tools to
avoid cutting your hands.
Secure the caster wheel Assy with a vise.
1
y5nvao-001
Inspection of Caster Wheel_001
1 Caster wheel Assy
Follow the steps below to remove the
wheel from the front wheel arm.
Remove the nuts and spring washers of
both sides.
Remove the collars and washers of both
sides.
Remove the front wheel shaft and then
remove the wheel.
5
4
3
2
3
1
1
2
y5nvao-002
Inspection of Caster Wheel_002
1 Nut and spring washer
2 Collar
3 Washer
4 Front wheel shaft
5 Wheel
Follow the steps below to remove the
bearing from the wheel.
Place the wheel on the vise to create
space for the bearing to be pushed out.
1.
2.
[1]
[2]
[3]
3.
[1]
Operating Machine and Mower Units
GM1700
Operating Machine and Mower Units
Page 7-43
Contour Deck