Baroness GM1700, Руководство по обслуживанию

Страница: 127 / 192

Remove the rotary knife.
1
3
2
4
5
6
7
1wodks-003
Contour Deck_004
1 Square pipe
2 Rotary knife
3 Knife guide disc
4 Disc spring
5 Washer
6 Knife mounting bolt
7 Offset wrench
Caution
The disc spring has a specific installation
orientation.
Do not install it facing the wrong direction.
2
3
4
5
1
1wodks-004
Contour Deck_005
1 Rotary knife
2 Knife guide disc
3 Disc spring
4 Washer
5 Knife mounting bolt
[5]
Important
The tightening torque for the knife mounting
bolt is 130 - 150 N-m (1,325.61 - 1,529.55 kgf-
cm).
Install the rotary knife.
For installing the rotary knife, reverse
the removing procedure.
Universal Joint
Removal of Universal Joint
Danger Danger
The rotary knife is an edged tool.
Handle it carefully, since it could cut your
hands or legs.
Make sure that the parking brake is
applied.
Remove the mower unit. (See "Removal
of Mower Unit" (Page 7-9) .)
Warning
When jacking up the machine, jack up the
portion described in the jack-up portion.
Do not jack up any other portions than the
specified ones.
It may damage the frame or parts.
Raise the vehicle with a hoist and place
the jack stand in the jack point to secure
the main body.
2
1
3
xvwh4g-001
Removal of Universal Joint_001
1 Jack stands
2 Universal joint
3 Hoist
Remove the cotter pin and the washer
from the joint shaft housing Assy and
then remove the pin.
4.
￭
1.
2.
3.
4.
Operating Machine and Mower Units
GM1700
Operating Machine and Mower Units
Page 7-11
Contour Deck