Baroness GM1700, Руководство по обслуживанию

Страница: 157 / 192

Danger Danger
The rotary knife is an edged tool.
Handle it carefully, since it could cut your
hands or legs.
Caution
Wear gloves when touching edged tools to
avoid cutting your hands.
Follow the steps below to remove the
wheel from the bracket.
Remove the bolts and spring washers
from the shaft of the bracket.
Remove the wheel tightening washer.
Remove the washer.
1
2
3
1 2
3
5is35y-001
Inspection of Rear Wheel of Center Deck_001
1 Bolt and spring washer
2 Wheel tightening washer
3 Washer
Secure the bracket with a vise.
Remove the wheel tapping it from front
to back and from side to side alternately
with a wooden hammer in the direction
of the arrow.
1
3
2
5is35y-002
Inspection of Rear Wheel of Center Deck_002
1.
[1]
[2]
[3]
[4]
[5]
1 Vise
2 Bracket
3 Wheel
Follow the steps below to remove the
bearing from the wheel.
Place the wheel on the vise to create
space for the bearing to be pushed out.
Remove the bearing hitting it from front
to back and from side to side alternately
with a wooden hammer using an iron
pipe.
You can remove the collar together.
Turn the wheel upside down and
remove the bearing of the other side in
the same way.
3
2
4
1
8i4lkm-003
Inspection of Rear Wheel of Center Deck_003
1 Vise
2 Iron pipe
3 Wood hammer
4 Wheel
Important
Be sure to replace the bearing with new one.
2.
[1]
[2]
[3]
Operating Machine and Mower Units
GM1700
Operating Machine and Mower Units
Page 7-41
Contour Deck