Baroness GM1700, Руководство по обслуживанию

Страница: 155 / 192

Remove the bracket by tapping the bolt
with a wooden hammer while holding
the bracket by one hand.
4
2
1
3
8i4lkm-002
Inspection of Left and Right Wheels of Center
Deck_002
1 Vise
2 Wheel Assy
3 Bolt
4 Wood hammer
Follow the steps below to remove the
bearing from the wheel.
Place the wheel on the vise to create
space for the bearing to be pushed out.
Remove the bearing by hitting it from
front to back and from side to side
alternately with a wooden hammer using
an iron pipe.
You can remove the collar together.
Turn the wheel upside down and
remove the bearing of the other side in
the same way.
3
2
4
1
8i4lkm-003
Inspection of Left and Right Wheels of Center
Deck_003
1 Vise
2 Iron pipe
3 Wood hammer
4 Wheel
[6]
2.
[1]
[2]
[3]
Important
Be sure to replace the bearing with new one.
Follow the steps below to install the wheel
into the bracket.
Secure the bracket firmly onto the vise.
Insert the washer into the shaft of the
bracket.
1
8i4lkm-004
Inspection of Left and Right Wheels of Center
Deck_004
1 Washer
Drive the bearing into the shaft of the
bracket evenly.
Note:
Use a bearing driver to drive in the
bearings and oil seals.
2
1
8i4lkm-005
Inspection of Left and Right Wheels of Center
Deck_005
1 Bearing
2 Driver
3.
[1]
[2]
[3]
Operating Machine and Mower Units
GM1700
Operating Machine and Mower Units
Page 7-39
Contour Deck