Baroness GM1700, Руководство по обслуживанию

Страница: 154 / 192

Important
Be sure to replace the bearing with new one.
Caution
See the list in "Tightening torques" (Page
3-6) .
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening, etc.
Install the front roller ass'y following the
reversed procedure of the procedure 2 to
4.
Make sure that the roller rotates smoothly
with no play when the roller shaft is fixed.
Install the front roller ass'y. (See
"Installation of Front Roller Assy" (Page
7-16) .)
Inspection of Left and Right Wheels of Center
Deck
Wear of bearing due to frequent use and/or
damage of bearing etc. caused by invasion
of water may prevent smooth rotation of the
rubber wheel. Inspect and replace the parts
such as the bearing.
Make sure that there is no abrasion or
adhesion of the rubber wheel.
Make sure that there is no wear of the
wheel shaft of the bracket.
Make sure that the bracket is not cracked
or bent.
Make sure that there is no wear of the
collar, bolt, or washer etc.
Make sure that there is no wear or rusting
of the bearing.
Make sure that there is no play in the fit of
the wheel shaft of the bracket and the
bearing.
5.
6.
7.
￭
･
･
･
･
･
･
Danger Danger
The rotary knife is an edged tool.
Handle it carefully, since it could cut your
hands or legs.
Caution
Wear gloves when touching edged tools to
avoid cutting your hands.
Follow the steps below to remove the
wheel from the bracket.
Remove the bolts and spring washers
from the shaft of the bracket.
Remove the wheel tightening washer.
Remove the washer.
3
1
2
8i4lkm-001
Inspection of Left and Right Wheels of Center
Deck_001
1 Bolt and spring washer
2 Wheel tightening washer
3 Washer
Place the wheel on the vise to create
space for the bracket to be pushed out.
Screw the bolt into the shaft of the
bracket by 10 mm (0.39 in).
1.
[1]
[2]
[3]
[4]
[5]
GM1700
Operating Machine and Mower Units
Page 7-38
Contour Deck