Baroness GM1700, Руководство по обслуживанию

Страница: 168 / 192

Inspection of Left and Right Deck Tension
Lever Assy
Wear of bearing due to frequent use and/or
damage of bearing etc. caused by invasion
of water may prevent smooth rotation of the
tension pulley. Inspect and replace the parts
such as bearing.
Make sure that there is no wear or crack
of the tension pulley.
Make sure that there is no abrasion or rust
of the bearing and no play between the
shaft of the tension lever and bearing.
Make sure that the tension lever or rod is
not cracked or bent.
￭
･
･
･
Danger Danger
The rotary knife is an edged tool.
Handle it carefully, since it could cut your
hands or legs.
Caution
See the " "Tightening torques" (Page 3-6) "
list.
Note that the Baroness product warranty may
not apply to defects caused by incorrect
tightening etc.
Important
The tension pulley is different between the left
and right decks.
Check the installation position.
Follow the steps below to remove the
tension pulley.
Remove the cap of the pulley with a flat-
blade screwdriver.
1
2
3
4uyhhy-001
Inspection of Left and Right Deck Tension Lever
Assy_001
1 Bolt and spring washer
2 Cap
3 Pulley
1.
[1]
GM1700
Operating Machine and Mower Units
Page 7-52
Contour Deck