Baroness GM1700, Руководство по обслуживанию

Страница: 162 / 192

Follow the steps below to install the
bearing onto the wheel.
Drive the bearing into the wheel evenly.
(It enters deeper inside beyond the
upper face of the housing.)
Note:
Use a bearing driver to drive in the
bearings and oil seals.
Turn the wheel upside down and insert
the collar
2
1
8i4lkm-008
Inspection of Caster Wheel_011
1 Bearing
2 Driver
Drive the bearing into the wheel evenly.
(It enters deeper inside beyond the
upper face of the housing.)
Follow the steps below to install the wheel
onto the front wheel arm.
Secure the front wheel arm w/shaft with
a vise.
Insert the front wheel shaft into the front
wheel arm a little in the direction of the
arrow and pass the collar, copper
washer, wheel, copper washer, and
collar in order to the front wheel shaft.
Tighten the spring washers and nuts of
both sides.
6
2
3
4
3
5
1
5
4
y5nvao-010
Inspection of Caster Wheel_012
9.
[1]
[2]
[3]
10.
[1]
[2]
[3]
1 Front wheel arm
2 Front wheel shaft
3 Copper washer
4 Collar
5 Wheel
Make sure that the wheel rotates
smoothly.
1
y5nvao-011
Inspection of Caster Wheel_013
1 Wheel
[4]
GM1700
Operating Machine and Mower Units
Page 7-46
Contour Deck