54
ImagePRO-II • User’s Guide
4. Menu Orientation
Configuring Outputs
lìíéìí=jÉåì=cìåÅíáçåë=~åÇ=pìÄãÉåìë
All
Output Menu
functions and submenus are discussed in the following sections:
Setting ColorSpace, Sample Rate, and Bit Depth
Viewing Output EDID Information
Saving an Output Configuration
Restoring Output Configuration Default Values
pÉííáåÖ=íÜÉ=lìíéìí=cçêã~í
The
Output
Format
is the first setting on the
Output Menu.
This option sets the resolution
and frame rate at which you drive your projector or display. With the 3D/Dual Channel
mezzanine installed and
System Mode
set to
Dual2K
, the
Output Menu
includes this
information for both channels, as shown in the following illustration.
Figure 4-24.
Output Menu in Dual-Channel Mode
When you change the output format, you also change the following settings:
•
Output colorspace, based on the format you select
•
Sync settings, based on the format you select
•
Genlock and H/V offsets, which reset to
0
•
The default
Area of Interest
, which resets to match the output’s active area. For
more information, refer to the section
on page 56.
To change the output format, use the following procedure:
1.
On the
Output Menu
, scroll to the format field and press
SEL
.
2.
Scroll to the format you want using the
ADJUST
knob, then press
SEL
again. The
output is not updated until you press
SEL
.
To minimize synchronization problems, select a frame rate that is consistent with
your input sources.
Example
: If you are using 59.94 NTSC video inputs, running the output at
the same rate reduces frame-rate conversion artifacts.
rëáåÖ=lìíéìí=^ìíç=`çåÑáÖ
Extended Display Identification Data
(
EDID
) is a data structure that an output display
uses to describe itself to a video source. The EDID can include information such as the
manufacturer’s name, a serial number, product type, timings supported by the display,
display size, and other data.
OUTPUT
>CHA
1 2 8 0 x 7 2 0 p @6 0
CHB
1 2 8 0 x 7 2 0 p @6 0
Ou t p u t Au t o Co n f i g
> >