![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304083.webp)
68
ImagePRO-II • User’s Guide
4. Menu Orientation
Configuring Outputs
Figure 4-46.
Image Flip — Vertical
The options are
H
,
V
,
H+V
, and
Off
. The default setting is
Off
.
•
Strobe Mode
— This option turns the strobe effect
On
or
Off
. The default setting
is
Off
. If
Strobe Mode
is on, the timing of the strobe’s flash effect is determined by
the
Strobe Rate
setting.
•
Strobe Rate
— This option sets the timing of the strobe’s flash, when
Strobe
Mode
is on. The range of this rate is adjustable from
2
to
100
frames. The default
setting is
2
frames.
^Äçìí=dÉåäçÅâ=pÉííáåÖë
The
Genlock Submenu
tells the ImagePRO-II which signal to lock on, when you want to
synchronize to a source signal. The following illustration shows the options on the
Genlock
Submenu
.
Figure 4-47.
Genlock Submenu
The
Genlock Submenu
options are:
•
Source
— This option selects the Genlock source from the following values:
Freerun
,
External
, or an
Input
button. External sync supports both NTSC/PAL
blackburst and HD tri-level syncs.
•
H/V Offset
— This option sets the Horizontal and Vertical offsets separately.
When you select this option, the
Genlock Offset Submenu
appears, and
provides the following options:
GENLOCK
> Source
Freerun
H/V Offset
>>
Status Freerun