ImagePRO-II • User’s Guide
63
4. Menu Orientation
Configuring Outputs
pÉííáåÖ=`çäçêpé~ÅÉI=p~ãéäÉ=o~íÉI=~åÇ=_áí=aÉéíÜ=
The ImagePRO-II supports setting the output colorspace, sample rate and bit depth. Within
limits, you can modify these settings for some outputs.
From the
Output Menu
, select the
ColorSpace/Bit Depth
option. The following menu
appears, showing valid options for each output type.
Figure 4-38.
Output Color/Sample/Bit Menu
The options vary according to the output type:
•
DVI
— The option is:
~
RGB, 4:4:4, 24 bit
The preceding setting is also the default setting upon format change, or when the
EDID information is invalid or not present.
•
HD-15
— The options are:
~
RGB, 4:4:4, 30 bit
~
YCbCr, 4:4:4, 30 bit
The default settings upon format change or when EDID information is invalid or
not present are:
~
Sync on G/Y:
YCbCr, 4:4:4, 30 bit
~
HV Sync
or
CSync:
RGB, 4:4:4, 30 bit
•
HDMI
— The available options are based on the output EDID information, and can
include:
~
RGB, 4:4:4, 24 bit
~
RGB, 4:4:4, 30 bit
~
RGB, 4:4:4, 36 bit
~
YCbCr, 4:4:4, 24 bit
~
YCbCr, 4:4:4, 30 bit
~
YCbCr, 4:4:4, 36 bit
The default setting upon format change is:
~
RGB, 4:4:4, at a bit depth equal to the maximum supported, as given in
the EDID information.
The default setting when the EDID information is invalid or not present is:
~
RGB, 4:4:4, 24 bits
•
DisplayPort
— The options are:
OUT COLOR/SAMPLE/BIT
> DVI RGB,
4:4:4, 24bit
HD15 RGB,
4:4:4, 30bit
HDMI RGB,
4:4:4, 24bit
DP RGB,
4:4:4, 24bit
SDI 1 YCbCr 4:2:2 30bit
SDI 2 YCbCr 4:2:2 30bit