ImagePRO-II • User’s Guide
95
4. Menu Orientation
Using the System Menu
source device reads this information. The selections are
2
and
8
. The default
setting is
8
.
This feature is useful when the audio being played from the source is more than
two channels, and you want to use the two analog audio outputs on the Audio
mezzanine. When you set this value to 2, the player down-mixes the multiple
channels of audio to just two channels.
5.
Scroll to
Program EDID
. This option lets you set your new format as the preferred
resolution for the current input.
6.
Press
SEL
. The following message appears. Press
ESC
to continue.
Figure 4-87.
EDID Confirmation Message
pÉííáåÖ=aáëéä~ó=_êáÖÜíåÉëë
The
VFD Brightness Submenu
adjust the intensity of the front panel vacuum fluorescent
display (VFD) screen. The adjustment range is
+0
to
+6
, with
+6
being the brightest. The
default setting is
+3
.
içÅâáåÖ=íÜÉ=cêçåí=m~åÉä
When the ImagePRO-II’s front panel is locked, button presses have no effect. In the locked
mode:
•
All button presses and all turns of the
ADJUST
knob are ignored.
•
All Ethernet and serial communications commands function normally.
•
All button lights continue to reflect the correct state of the inputs.
To enable and disable the front-panel lock, use the following procedure:
1.
On the
System Menu
, scroll to
Lock Front Panel
and press
SEL
.
The front panel is locked, and the following message appears.
Note
Unless you use
Program EDID
, the new resolution will not be
stored as the preferred resolution.
EDID Prog Done
<ESC> = Continue
Note
Using a low intensity is advisable, to avoid “burn-in” of the
display screen.