Barco ImagePRO-II Jr, Дополнение к руководству пользователя, Страница: 90 / 166

ImagePRO-II • User’s Guide 75
4. Menu Orientation
Creating Custom Formats
The Interlaced option is either On or Off . When Interlaced is On , the V Total
value is forced to an odd number.
When you press SEL to select an option in this list, the navigation cursor changes
to an edit cursor.
4. Turn the ADJUST knob clockwise to increase the value for your option, or
counter-clockwise to decrease the value. When you see the value you want, press
SEL .
5. Repeat the previous two steps for the next value you want to change.
p~îáåÖ=~=`ìëíçã=cçêã~í

To save a custom format, use the following procedure:
1. After you have created a custom format, scroll to Save As and press SEL . The
Save Format As Submenu appears.
Figure 4-54. Save Format As Submenu
2. With the navigation cursor at the format name field, press SEL .
The navigation cursor changes to the edit cursor, and the first character field is
blank with an underscore.
3. Use the ADJUST knob to scroll to the first character you want to use for the
format name, and press SEL . The cursor moves to the next character field, which
is now blank with an underscore.
4. Continue until you have selected all the characters. Your format name can have
up to 19 characters. Press
SEL after making your final selection.
5. Press SEL again to exit the edit mode. The navigation cursor returns and your
format name appears in the display screen.
6. Scroll to Save and press SEL .
If your format name has never been used before, the Format Saved message
appears.
Note You must save the format in order to ensure that it is available
to the system. If you change format values but fail to save the
changes, your custom or edited format will not be stored.
Refer to the
Saving a Custom Format section on this page
for more information.
SAVE FORMAT AS
> Format1
Save