![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304060.webp)
ImagePRO-II • User’s Guide
45
4. Menu Orientation
Configuring Inputs
Figure 4-14.
Edge Timing Adjust Submenu (sample)
Using this menu, you can set the exact locations of the active video edges, when
1:1
Sample
is
Off
. For the right and left edges, the values are in pixels, and the position is
relative to the start of H Sync. For the top and bottom edges, the values are in numbers of
lines, relative to the start of V Sync.
Because
1:1 Sample
is off, the image is oversampled, and the image quality may be lower
than when
1:1 Sample
is turned on.
pÉííáåÖ=fåéìí=`çåíê~ëí=~åÇ=_êáÖÜíåÉëë
From the
Input Menu
, select
Contrast
to change the contrast of the selected input. Select
Brightness
to change the brightness.
For both
Contrast
and
Brightness
, the adjustment range is in percentages, from
25%
to
150%
. The default setting for both parameters is
100%
. Use the
ADJUST
knob to scroll
through the range, and press
SEL
to select a value.
pÉííáåÖ=fåéìí=`çäçê=_~ä~åÅÉ
From the
Input Menu
, select
Color Balance
to change contrast, brightness, hue, and
saturation values for the selected input. The
Input Color Balance Submenu
appears. The
values for contrast, brightness, and saturation are in percentages. The values for hue are in
degrees.
Figure 4-15.
Input Color Balance Submenu
EDGE TIMING ADJUST
> Right Edge
2460
Left Edge
592
Top Edge
85
Bottom Edge
803
Note
When making active area adjustments, turn on the
Output
Raster Box
, and align the input image with all four edges of
the box. To turn on the raster box, refer to the
section on page 70.
I
NPUT COLOR BALANCE
> Red Contrast
100
Red Brightness
100
Green Contrast
100
Green Brightness
100
Blue Contrast
100
Blue Brightness
100
Hue
+0
Saturation
100
Reset All