ImagePRO-II • User’s Guide
59
4. Menu Orientation
Configuring Outputs
2.
If you have the 3D/Dual Channel mezzanine installed, and the System Mode is set
to Dual2K, select a channel to work with, or accept the default setting of
All
.
3.
To change the horizontal size of the AOI, select
H Size
and turn the
ADJUST
knob counter-clockwise. Press
SEL
when the image is placed correctly.
4.
To change the vertical size of the AOI, select
V Size
and turn the
ADJUST
knob
counter-clockwise. Press
SEL
when the image is placed correctly.
5.
To change the horizontal position of the AOI, select
H Pos
and turn the turn the
ADJUST
knob counter-clockwise. Press
SEL
when the image is placed correctly.
6.
To change the vertical position of the AOI, select
V Pos
and turn the
ADJUST
knob counter-clockwise. Press
SEL
when the image is placed correctly.
7.
If required, repeat steps 2 through 6 for the second channel.
8.
To revert
all
your changes to their default settings, select
Reset
.
For information about setting an Area of Interest on a per-channel basis, refer to “
the Area of Interest in Dual-Channel Mode
” on page 110.