![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304137.webp)
154
ImagePRO-II • User’s Guide
5. Web Remote Control Operations
Configuring Outputs with the Web App Interface
Figure 5-26.
Output Auto Config Page
To let the output device change the output format of the ImagePRO-II, use the
following procedure:
1.
On the
Output Auto Config
page, select the field for one of the outputs.
2.
Click
Auto Config
.
If a change is required, the change takes effect immediately. If the change is not
successful, an error message appears below the Auto Config button. In this case,
check that the output display is connected and try again.