![background image](http://html1.mh-extra.com/html/barco/imagepro-ii-jr/imagepro-ii-jr_user-manual-addendum_3876304003.webp)
26-0904101-00 Rev 01.00
7
1.
Introduction
This addendum is only intended to introduce you to ImagePRO-II Jr and provide an
overview of the ImagePRO-II Jr product. For detailed operating instructions, please refer to
the ImagePRO-II User’s Guide that can be found on your Product CD.
2.
ImagePRO-II Jr Product Overview
ImagePRO-II Jr is Barco’s entry-level model to its ImagePRO-II family of all-in-one video
scalers, scan converters, switchers, and transcoders. The ImagePRO-II Jr converts a range
of user selectable video input signals, including RGB, HDTV, component, S-video, composite
(NTSC, PAL) and SD/HD/3G-SDI – to an array of output signal formats to meet the
requirements of many applications. ImagePRO-II Jr supports resolutions up to 2048 x
1200.
The ImagePRO-II Jr supports HIGH-BANDWIDTH DIGITAL PROTECTION(HDCP) on its DVI
connectors.
Like the ImagePRO-II product, ImagePRO-II JR includes a web interface that will allow you
to remotely control all ImagePRO-II Jr features from a computer, tablet, smartphone, or
other web-enabled mobile device. The Web Interface’s pages, menus, and graphics allow
you to easily upgrade system firmware, run test patterns, and control inputs and outputs.
For details about Web interface, refer to Chapter 5 of the ImagePRO-II User’s Guide.
ImagePRO-II Jr can also be operated remotely using the Barco Encore
TM
Controller (release
2.32 or higher), or the ScreenPRO-II Controller. For information about connecting the
ImagePRO-II Jr to the Encore or ScreenPRO-II Controller, refer to the
Encore
Presentation System User’s Guide
or the
ScreenPRO-II Controller User’s Guide
.