94
ImagePRO-II • User’s Guide
4. Menu Orientation
Using the System Menu
Figure 4-84.
Remote Connection Message
8.
When the connection is established, a confirmation message appears.
`Ü~åÖáåÖ=fåéìí=bafa
The ImagePRO-II’s EDID information is stored in non-volatile memory. This file contains
the preferred and allowed resolutions for each EDID-capable input in the ImagePRO-II. An
external device’s graphics card reads this file when the device is connected to an
ImagePRO-II input. The ImagePRO-II does not have to be powered up while the file is
being read.
You can change the
preferred
resolutions for the DVI-I, HD-15, HDMI, and DisplayPort
input connectors. You cannot change the
allowed
resolutions for these inputs.
To change the EDID preferred resolution for an input, use the following procedure:
1.
On the
System Menu
, select
Input EDID
. The
Input EDID Submenu
appears.
Figure 4-85.
Input EDID Submenu
2.
Select an input option. The following menu appears:
Figure 4-86.
EDID Input Format Submenu
On this submenu, the input you selected is shown in the upper right corner. On the
next line is the current format for this input. On the third line, you can select and
change this format.
3.
The third line defaults to the current format. Press
SEL
and use the
ADJUST
knob
to scroll through a list of available input formats, and press
SEL
again.
4. Audio
Chnl
Max
is diplayed on the fourth line, if you select
Input 3 (HDMI)
or
Input 4 (DP)
from the
Input EDID Submenu
. This line displays the maximum
number of audio channels the ImagePRO-II supports. The HDMI or DisplayPort
Attempting remote
connection
Please wait . . . .
INPUT EDID
> Input 1 (DVI)
>>
Input 2 (HD15)
>>
Input 3 (HDMI)
>>
Input 4 (DP)
>>
EDID IN FORMAT
4
Cu r 1 9 2 0 x 1 0 8 0 p @ 5 9 . 9 4
> 1 9 2 0 x 1 0 8 0 p @ 5 9 . 9 4
Program EDID
Input Number
Current Resolution
Editable Resolution