110
ImagePRO-II • User’s Guide
4. Menu Orientation
Operating the ImagePRO-II in Dual-Channel Mode
Figure 4-103.
Output Effects Submenu in Dual-Channel Mode
pÉííáåÖ=íÜÉ=^êÉ~=çÑ=fåíÉêÉëí=áå=aì~äJ`Ü~ååÉä=jçÇÉ
With the 3D/Dual Channel mezzanine installed and the system mode set to
Dual2K
, the
Area of Interest Menu
includes a Channel field that lets you set the AOI separately for
each channel. The AOI will apply to any output mapped to the selected channel.
Figure 4-104.
Area of Interest Submenu in Dual-Channel Mode
To set or revert the output Area of Interest in dual-channel mode, use the following
procedure:
1.
From the
Output Menu
, select
Area of Interest
. The
Area of Interest Submenu
appears, showing default settings equal to the H and V actives of the output
timing.
2.
Select a channel to work with, or accept the default setting of
All
.
3.
Adjust the AOI as described in “
4.
If required, repeat steps 2 and 3 for the second channel.
To revert
all
your changes for a channel to their default settings, select
Reset
.
tçêâáåÖ=ïáíÜ=m~å=~åÇ=wççã=pÉííáåÖë=áå=aì~äJ`Ü~ååÉä=
jçÇÉ
If you have the 3D/Dual Channel mezzanine installed, and you set the system mode to
Dual2K
, the
Zoom/Pan Menu
provides the option to create a view that can be used on one
or both channels. When you assign a view to a channel, you can recall and save that view
to any input that uses the selected channel or channels.
In dual-channel mode, the first lines of the
Zoom/Pan Menu
look like those in the following
illustration.
OUT EFFECTS
B
> Channel
B
Contrast
100
AREA OF INTEREST
A
> Channel
A
H Size
850
V Size
1080
H Pos
0
V Pos
0
Reset