FSN Series • User’s Guide
293
7. Operations
Working with Memory Registers
píçêáåÖ=jÉãçêó=oÉÖáëíÉêë
When you store a memory register, you take a “snapshot” of the switcher and the selected
modules. Once stored, you can
not
add data to that register — you can only overwrite it
with new data.
S
If you store
M/E 1
into register 100, you can not add
AUX
data into that
register. However, you could overwrite register 100 with new data.
Storing a memory register and bypassing the Enables is an easy equation. This method
stores the entire contents of the selected module(s).
•
STORE
,
[select modules]
,
[select register #]
,
ENTER
Storing a memory register and setting Enables is also an easy equation. This method
stores partial contents of the selected module(s).
•
STORE
,
[select modules]
,
[select register #]
,
[set Enables]
,
ENTER
The following topics are discussed in this section:
•
Store, Bypass Enables, Use Default Name
•
Store, Bypass Enables, Enter Custom Name
•
Store, Set Enables, Enter Custom Name
•
píçêÉI=_óé~ëë=bå~ÄäÉëI=rëÉ=aÉÑ~ìäí=k~ãÉ
Use the following steps to store a memory register, bypass Enables, and use the
default register name:
1.
Set up the switcher in the exact configuration that you want stored.
2.
On the
Keypad
, press
STORE
.
3.
Select the desired modules to include in the register.
4.
Enter the desired register number.
5.
Press
ENTER
. The register is now stored in memory, all Enables are on, and a
default number has been assigned (
reg-#
). Above the
Keypad
, the selected
register number and the default label “
reg-#
” appear in the
Memory Display
,
adjacent to the prefix “
STR:
”
píçêÉI=_óé~ëë=bå~ÄäÉëI=båíÉê=`ìëíçã=k~ãÉ
Use the following steps to store a memory register, bypass Enables, and enter a
custom register name:
1.
Set up the switcher in the exact configuration that you want stored.
2.
On the
Keypad
, press
STORE
.
3.
Select the desired modules to include in the register.
4.
Enter the desired register number.
5.
Navigate to the
Memory Menu
. The selected register will be highlighted in the
table, and the “
STORE
” banner will be lit red.
6.
Press
{Description}
to display the
Pop-up Keyboard
.
