FSN Series • User’s Guide
201
5. Menu Orientation
System Menu
and re-scale the input. Refer to the “
” section
on page 204 for details.
•
Press
{Input Format}
to display the
Input Format Keypad
. Use the up (
S
) and
down (
T
) arrows to locate the desired format in the list, then press
{Apply}
to
accept. In Appendix A, Refer to the “
Input and Output Format Tables
” section
on page 320 for the complete list of formats.
•
Press
{EDID Format}
to display the
EDID Format Keypad
, which enables you to
update the preferred EDID (Extended Display Identification Data) resolution for
the selected input. EDID is a VESA standard data format that contains
information about a display device and its capabilities, including the preferred (as
well as the allowed) device resolutions.
The selected input’s EDID file is stored in non-volatile memory. This file is read by
a computer's DVI graphics card during boot-up, when its DVI output is connected
to a DVI-I input connector on the FSN-1400. The FSN-1400 must be powered on
first for the EDID information to be read.
In the
EDID Format Keypad
, use the up (
S
) and down (
T
) arrows to locate the
desired EDID format in the list, then press
{Apply}
to program the EDID.
•
Press
{Color Space}
to toggle between
SMPTE
and
RGB
processing. Note that
the system automatically sets the Color Space based on the selected format, but
the color space can be changed if desired.
~
Select
SMPTE
to process the input signal in the SMPTE color space
(4:2:2), in which the two chroma components are sampled at half the
sample rate of luminance component. This mode is commonly used for
cameras, video servers, etc.
~
Select
RGB
to process the input signal in RGB color space (4:4:4), in
which the individual red, green and blue signals are sampled at the same
rate. The
RGB
mode is typically used for computer and graphic sources.
•
Press
{1:1 Sampling}
to toggle the 1:1 sampling mode on or off.
~
Select
On
to process the input with pixel-for-pixel sampling to provide
better image quality.
Input
Format
EDID
Format
Note
This function is available for analog and DVI inputs only. The
button does not appear when an SDI input is selected on the
UIC
.
Important
This feature is designed for advanced users only. Do not
program the EDID unless it is necessary.
Color
Space
SMPTE
Note
This function is available for DVI and analog inputs only, with
the exception of NTSC and PAL. The button does not appear
when an SDI, NTSC or PAL input is selected on the
UIC
.
1:1
Sampling
On
