Barco FSN Series, Руководство пользователя

Страница: 158 / 344

158 FSN Series • User’s Guide
5. Menu Orientation
Memory Menu
jÉãçêó=jÉåì=^ÅÅÉëë
There are two ways to access the Memory Menu :
•
In the Menu Bar , press {Page} to display page 2 (if required). Then, press the
{Memory} button.
•
Press and hold either the STORE or RECALL button in the control panel’s
Memory Section .
When either of the two methods above are used, the following rules apply:
•
If neither the STORE nor the RECALL button is lit, you will access the menu in
View Mode .
•
If STORE is lit, you will access the menu in Store Mode .
•
If RECALL is lit, you will access the menu in Recall Mode .
Note Regardless of the mode, you will always return to the last
menu used, either the
Memory Menu or the Enables Menu .
For example, if you are working on the Enables Menu and
you jump over to the Transition Menu , you will return to the
Enables Menu .
Important Remember that you can store and recall memory registers by
using the
Memory Section on the control panel only —
without accessing the Memory Menu . In this “panel only”
mode, you can select registers and modules, but you cannot
modify any Enables. Please note:
•
If you store a register using the control panel’s
Keypad only (without using the Memory Menu ), all
Enables will be on.
•
If you recall a register using the control panel’s
Keypad only (without using the Memory Menu ), all
Enables will be on — exactly as stored in the register.