FSN Series • User’s Guide
191
5. Menu Orientation
System Menu
fåéìí=jÉåì=cìåÅíáçåë
The following functions are available in the
Tool Bar
:
•
Press
{Map to}
to map the selected input to the control panel. When pressed, the
Map To Pop-up
appears.
Figure 5-84.
Map To Pop-up
On the Program Bank’s
Preset Bus
, press the button on which you want the input
to appear. Once selected, the button mapping appears in the table’s “
Map
”
column, and the input can now be selected on the panel.
•
Press
{Input Name}
to associate a four-character name with the selected input.
When pressed, the pop-up
Keyboard
appears. Enter the desired name and
press
{Enter}
on the
Keyboard
. On the panel, the name appears on the display
above the selected input. In the table, the name appears in the “
Name
” column.
See the “
” section on page 133 for more details
about the keyboard, and the “
” section on
page 193 for details about default input names.
•
Press
{Un-Map}
to remove the selected input mapping from the panel. When
pressed, the input is removed, and its name is also removed from the
programmable display. Please note:
~
If the input is mapped to more than one panel location, all locations are
un-mapped and removed.
~
When an input is un-mapped, the input name and all associated setup
parameters are retained. Only the mapping is removed from the panel.
•
For both native and universal inputs, press
{Freeze}
to toggle the freeze “state” of
the selected input.
~
Select
On
to freeze the input.
~
Select
Off
to un-freeze the input.
•
For interlaced native resolutions only, press
{Freeze Mode}
to display the
Freeze
Mode Pop-up
. The following “freeze mode” options are available:
~
Field 1
— freezes the source on field 1.
~
Field 2
— freezes the source on field 2.
Map to
Map to
Note
On the Program Bank’s Preset Bus, select the button on which
you want the input to appear.
Close
Input
Name
Un-map
Freeze
Off
Note
The button’s state (
On
or
Off
) changes automatically if you
perform a freeze or un-freeze using the control panel’s
FRZ
and
UN FRZ
custom control functions. In Chapter 7, refer to
the “
Using Custom Control Functions
” section on page 300
for details.
Freeze
Mode
Field 1
