B&R Power Panel C80, Руководство пользователя

Страница: 48 / 74

Software
6.2.2.1.1 Static boot logo
Parameter Setting/Description
Logo Default setting: None
Selects the boot logo:
Selection Description
None No boot logo selected.
[Dateiname].bmp Boot logo "[Dateiname].bmp" selected.
A static boot logo for the Power Panel can be selected here that will be displayed during device startup and when estab-
lishing the connection to the web server.
Information about the boot logo: "Boot logo" on page 63
6.2.2.1.2 Boot animation
Parameter Setting/Description
Animation Default setting: None
Selects the boot animation
Selection Description
None No boot animation selected.
[Dateiname].gif Boot animation "[Dateiname].gif" selected.
An animated boot logo for the Power Panel can be selected here that will be displayed during device startup and when
establishing the connection to the web server. This will be placed on top of the static boot logo if necessary.
Information about the boot animation: "Boot animation" on page 63
X-offset [pixel] Defines the distance from an existing boot animation to the left edge of the display.
Y-offset [pixel] Defines the distance from an existing boot animation to the top edge of the display.
Delay [ms] Delay in milliseconds between individual images in the GIF animation. The individual values have the following effect:
Value [ms] Description
0 In this case, the delay defined in the GIF file will be used.
If no delay is defined in the GIF file, 100 ms is used.
>0 Applies the set delay time.
It may not be possible to achieve small values due to the power limits of the device. In this case, the animation is displayed
slower than the value specified.
6.2.2.2 Screen
Some settings for the display can be changed with the following parameters.
Parameter Setting/Description
Screen brightness Default setting: 50
Input range: 0 to 100
Unit: %
This value configures the basic setting of the display.
Setting 0% in the terminal configuration corresponds to a residual display brightness of 20%:
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
0 10 20 30 40 50 60 70 80 90 100
Range from 0 to 50 Range from 50 to 100
Brightness range of the display
Settings range in the terminal configuration
Screensaver Default setting: off
This option disables or enables the screensaver:
Selection Description
off The screensaver is disabled.
on The screensaver is enabled.
Options for the enabled screensaver are described in section "Screensaver settings" .
Screen rotation Default setting: 0°
Input range: 0°, 90°, 180°, 270° (in 90° steps)
The angle of rotation of the display is set here. This setting affects how screen content is output. After selection, the
display content is rotated clockwise according to the specified angle.
48 Power Panel C80 User's manual V1.02