Accessories
9.2 0TB1210.3100
9.2.1 General information
2-row 10-pin terminal block TB1210 is used to connect to the interfaces of various interface options.
9.2.2 Order data
Order number
Short description
Figure
Terminal blocks
0TB1210.3100
Connector 300 VDC - 10-pin female - Cage clamp terminal block
- Protected against vibration by the screw flange
9.2.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Order number
0TB1210.3100
General information
Certifications
CE
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
DNV GL
Temperature:
B
(0 - 55°C)
Humidity:
B
(up to 100%)
Vibration:
A
(0.7 g)
EMC:
B
(bridge and open deck)
2)
KR
Yes
EAC
Yes
Terminal block
Note
Nominal values according to UL
Number of pins
10 (female)
Type of terminal block
PUSH IN cage clamp terminal block connector
Cable type
Only copper wires (no aluminum wires!)
Pitch
3.5 mm
Connection cross section
AWG wire
26 to 16 AWG
Wire end sleeves with plastic covering
0.14 to 1 mm²
Solid wires
0.14 to 1.5 mm²
Fine-stranded wires
0.14 to 1.5 mm²
With wire end sleeves
0.14 to 1.5 mm²
Electrical properties
Nominal voltage
300 V
Nominal current
3)
10 A
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
1)
Yes, although applies only if all components installed within the complete system have this certification and the complete system itself carries the corresponding
mark.
2)
Yes, although applies only if all components installed in the complete system have this certification and are listed on the associated DNV GL certificate for
the product family.
3)
The limit data for each I/O module must be taken into consideration.
70
Power Panel C80 User's manual V1.02
