Device description
4.8 Product information
Battery
PLK
IF1
ETH
IF2
USB
IF4/IF5
Power 24VDC
Reset
Button
R/E
OPS1
RDY/F
Power
OPS2
OPS3
OPS4
OPS5
X2X
IF6
OP1/OP2
Figure 1: Product information for a 5.7" device
Battery
5P1011000000L1-000
ED150168421
Made in Austria
ETH: 00-E0-48-40-9F-87
: 00-E0-48-40-9F-88
PLK
B&R Industrial Automation GmbH
B&R Straße 1, 5142 Eggelsberg, AUSTRIA
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
Use only non-incendive USB
devices as described in the
user manual. Surrounding air
temp.: see user manual Type
4X indoor use only.
PLK
IF1
ETH
IF2
USB
IF4/IF5
Power 24VDC
Reset
Button
This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
www.br-automation.com
R/E
OPS1
RDY/F
Power
OPS2
OPS3
OPS4
OPS5
X2X
IF6
OP1/OP2
Figure 2: Product information for 7", 10.4", 12.1" and 15.6" devices
Position
Description
1
Specifications for the device family and electrical properties
2
Device-specific specifications, serial numbers and MAC addresses, see
Identification
.
3
Valid test and conformity ID for the product, see section
4
Safety notices, warnings and information about the product
5
License adhesive label for operating systems (configuration-dependent)
6
Space for individual customer information (configuration-dependent)
Power Panel C80 User's manual V1.02
35