Software
6.4 Updating/Installing the C80 system
When updating the Power Panel with a USB flash drive, it is important to note that the drive must have a capacity
of at least 256 MB. In addition, an industrial-grade USB flash drive must be used.
For technical data and additional information about storage media, see the corresponding documentation. This can
be located and downloaded by searching for the data storage device's order number at
6.4.1 B&R Hypervisor system
For general information about Automation Studio (e.g. operation, upgrades and creating projects as well as re-
quirements, configuring or installing B&R Hypervisor), see Automation Help.
Updating/Installing with Automation Studio
1. Create a corresponding project in Automation Studio with the hardware used.
2. Select the desired Automation Runtime, Visual Components, mapp versions, etc.
3. Establish an online connection to the target system.
4. Rebuild/Build the configuration and download the project.
Updating/Installing with Automation Studio and USB flash drive
1. Create a corresponding project in Automation Studio with the hardware used.
2. Select the desired Automation Runtime, Visual Components, mapp versions, etc.
3. Rebuild/Build the configuration of the project.
56
Power Panel C80 User's manual V1.02