B&R Power Panel C80, Руководство пользователя

Страница: 29 / 74

Device description
4.7 Device interfaces and slots
4.7.1 Interface overview
No. Interface name Chapter No. Interface name Chapter
1 Battery "Battery" 6 LED status indicators "LED status indicators"
2 Ethernet "Ethernet interfaces" 7 USB interfaces "USB interfaces"
3 POWERLINK "POWERLINK interface" 8 Power supply "Power supply"
4 Reset button Reset button 9 Grounding Grounding
5 Fieldbus Fieldbus interfaces -
4.7.2 Power supply
Danger!
This device is only permitted to by supplied by a SELV/PELV power supply unit or with safety extra-low
voltage (SELV) per IEC 61010-2-201.
The necessary 2-pin connector is not included in delivery; for suitable accessories, see "TB6102" on page 69 .
The device is protected against overload and reverse polarity by a soldered fuse (10 A, very fast-acting). If the
fuse is defective (e.g. due to overload), the device must be sent to B&R for repairs. If the polarity is reversed, it
is not necessary to replace the fuse.
Pin Description Symbol Figure
1 24 VDC
+
2 GND -
• Reverse polarity protection
• 2-pin
• Male
Electrical properties
Nominal voltage 24 VDC ±25%, SELV/PELV
1)
Overvoltage category per EN 61131-2 II
Inrush current Typ. 5 A, max. 100 A for < 50 μs
Galvanic isolation No
1) IEC 61010-2-201 requirements must be observed.
Power Panel C80 User's manual V1.02 29