B&R Industries Automation PC 620, Руководство пользователя

Страница: 76 / 512

76
Technical data • Entire device
Automation PC 620 User's Manual V 1.90
2.9.7 Monitor / Panel connection
When using this video output, understand that the video signals that are available (RGB, DVI,
and SDL - Smart Display Link) will vary depending on the system unit and CPU board.
Hotplug for a display device is not supported in any combination. The connection cycle value for
the plug is specified at 100x.
See "Definitions for RGB, DVI, SDL" on page 79 for descriptions of RGB, DVI and SDL.
5PC600.SX05-01 System 5 PCI, 2 disk drive slots Starting with revision D0
Monitor / Panel
The following will provide an overview of the video signals
available with different system units and CPU boards. 24-pin DVI-I with special functions, female
System unit 815E board 855GME board
5PC600.SX01-00 RGB, DVI, SDL RGB, DVI, SDL
5PC600.SX02-00 RGB RGB, DVI, SDL
5PC600.SX02-01 RGB, DVI, SDL RGB, DVI, SDL
5PC600.SX05-00 RGB RGB, DVI, SDL
5PC600.SX05-01 RGB, DVI, SDL RGB, DVI, SDL
Figure 23: Monitor / Panel connection
Caution!
The RGB, DVI and SDL cables can only be plugged in and unplugged when the
APC620 and display device (Automation Panel 900, monitor) are turned off.
Model number Description Revision
Table 31: System unit revisions for any standby times