B&R Industries Automation PC 620, Руководство пользователя

Страница: 273 / 512

Software • Automation PC 620 with BIOS
Chap
ter 4
•
Soft
w
are
273 Automation PC 620 User's Manual V 1.90
Default flat panel Should the connected panel fail to be
automatically recognized, a predefined
resolution can be set manually here. None A predefined resolution has not been set.
VGA, SVGA, XGA,
XGA2, SXGA, UXGA
VGA = 640 x 480 resolution
SVGA = 800 x 600 resolution
XGA = 1024 x 768 resolution
XGA2 = 1024 x 768 resolution
SXGA = 1280 x 1024 resolution
UXGA = 1600 x 1200 resolution
Flat panel scaling For setting whether the video signal
should be centered on the panel (stamp
format), or fill the entire display
(stretched). Centered Display is centered.
Stretched Display is stretched to fit screen.
Graphics engine 2 Settings can be made for the second
onboard video controller (only with an AP
Link card). Auto Automatic setting of the graphics engine 2. The
resolution is set using a read-out of the panel's
EDID data.
Disabled Deactivates the graphics interface.
Graphics engine Selection of the primary video output line -
depending on the system unit being used.
with 5PC600.SX01-00, 5PC600.SX02-01
and 5PC600.SX05-01
- Graphics engine 1: Monitor / Panel
- Graphics engine 2 : No support
with 5PC600.SX02-00 and
5CP600.SX05-00
- Graphics engine 1 : AP Link output
- Graphics engine 2: Monitor / Panel
Information:
The "Primary graphics engine" setting
is only relevant from the booting of the
system until a graphics driver is
started (e.g. in Windows).
Graphics engine 1 The primary video outputs are the display devices
on the monitor/panel plug with system units
5PC600.SX01-00, 5PC600.SX02-01 and
5PC600.SX05-01, or
the AP Link output with system units
5PC600.SX02-00 and 5CP600.SX05-00.
Graphics engine 2 The primary video outputs are the display devices
on the monitor/panel plug with system units
5PC600.SX02-00 and 5CP600.SX05-00.
Graphics memory
size For setting how much of the main memory
(in MB) the graphics controller can use. 1 MB 1 MB main memory to be used by the graphics
controller.
UMA = 8 MB 8 MB main memory to be used by the graphics
controller.
UMA = 16 MB 16 MB main memory to be used by the graphics
controller.
UMA = 32 MB 32 MB main memory to be used by the graphics
controller.
Assign IRQ to VGA This is where an IRQ is reserved and
automatically assigned for the CPU
board's onboard graphics. Enabled Enables this function.
Disabled Disables this function.
Internal graphics API
rev Displays the internal graphics API version
number. -
BIOS setting Description Setting options Effect
Table 192: 855GME - advanced chipset control - setting options