B&R Industries Automation PC 620, Руководство пользователя

Страница: 240 / 512

240
Software • Automation PC 620 with BIOS
Automation PC 620 User's Manual V 1.90
Interrupt Selection of the interrupt for the COM C
port.
A yellow star indicates a conflict with
another device. IRQ 3, IRQ 4, IRQ 5, IRQ
10, IRQ 11, IRQ 12, IRQ
15
Selected interrupt is assigned.
COM D Configuration of the COM D port for the
serial interface of an automation panel link
slot. The interface is used to operate the
touch screen on connected Automation
Panel 900 units. Disabled Deactivates the interface.
Enabled Activates the interface.
Base I/O address Configuration of the base I/O address for
the serial COM D port.
A yellow star indicates a conflict with
another device. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM D
port.
A yellow star indicates a conflict with
another device. IRQ 3, IRQ 4, IRQ 5, IRQ
10, IRQ 11, IRQ 12, IRQ
15
Selected interrupt is assigned.
COM E Configuration of the optional COM E port
of a B&R add-on interface option (IF
option). Disabled Deactivates the interface.
Enabled Activates the interface.
Base I/O address Configuration of the base I/O address for
the serial COM E port.
A yellow star indicates a conflict with
another device. 238, 2E8, 2F8, 328, 338,
3E8, 3F8
Selected base I/O address is assigned.
Interrupt Selection of the interrupt for the COM E
port.
A yellow star indicates a conflict with
another device. IRQ 3, IRQ 4, IRQ 5, IRQ
10, IRQ 11, IRQ 12, IRQ
15
Selected interrupt is assigned.
LPT This setting is specific to B&R and should
not be changed. Disabled Deactivates the interface.
Enabled Activates the interface.
Base I/O address Configuration of the base I/O address for
the optional LPT.
A yellow star indicates a conflict with
another device. 278, 378, 3BC Selected base I/O address is assigned.
CAN Configuration of the CAN port of a B&R
add-on CAN interface card (IF option). Disabled Deactivates the interface.
Enabled Activates the interface.
Base I/O address 384/385h None -
Interrupt Selection of the interrupt for the CAN port. IRQ 10 Selected interrupt is assigned.
NMI NMI interrupt is assigned.
2nd LAN controller For turning the on-board LAN controller
(ETH2) on and off. Disabled Deactivates the controller.
Enabled Activates the controller.
BIOS setting Description Setting options Effect
Table 163: 815E - Legacy devices - setting options (cont.)