B&R Industries Automation PC 620, Руководство пользователя

Страница: 249 / 512

Software • Automation PC 620 with BIOS
Chap
ter 4
•
Soft
w
are
249 Automation PC 620 User's Manual V 1.90
1.1.10 Profile overview
If the function "load setup defaults" is chosen in the main BIOS setup menu, or if exit is selected
(or <F9> is pressed) in the individual setup screens, the following BIOS settings are the
optimized values that will be used.
DIP switch position see Section 1.5.8 "Position of the DIP switch for APC620 system units" on
page 331).
The first six DIP switches (1-6) are used to set the profiles. The rest (7,8) are reserved.
Exit discarding
changes With this item you can close BIOS setup
without saving the changes made. The
system is then rebooted. Yes / No
Load setup defaults This item loads the BIOS setup defaults,
which are defined by the DIP switch
settings. These settings are loaded for all
BIOS configurations. Yes / No
Discard changes Should unknown changes have been
made and not yet saved, they can be
discarded. Yes / No
Save changes Settings are saved, and the system is not
restarted. Yes / No
Figure 124: DIP switch on system unit
Number Optimized for
DIP switch setting
1 2 3 4 5 6 7
1)
8
1)
Profile 0 Automation PC 620 system units 5PC600.SX01-00. Off Off Off Off Off Off - -
Profile 1 Reserved On Off Off Off Off Off - -
Profile 2 Automation PC 620 system units 5PC600.SX02-00, 5PC600.SX02-
01, 5PC600.SX05-00 and 5PC600.SX05-01. Off On Off Off Off Off - -
Profile 3 Panel PC 700 system unit 5PC720.1043-00, 5PC720.1214-00,
5PC720.1505-00, 5PC781.1043-00, 5PC781.1505-00 and
5PC782.1043-00. On On Off Off Off Off - -
Table 170: 815E - profile overview
BIOS setting Description Setting options Effect
Table 169: 815E - exit menu - setting options (cont.)