B&R Industries Automation PC 620, Руководство пользователя

Страница: 184 / 512

184
Commissioning • Connection examples - Automation Panel 900
Automation PC 620 User's Manual V 1.90
3.3 Configuration - Four Automation Panels via SDL on one line
An Automation Panel is connected to the integrated SDL interface via an SDL cable. Up to three
other Automation Panels of the same type are connected to this Automation Panel and operated
via SDL. All four displays show the same content (Display Clone).
USB is supported up to a maximum segment length of 30 m on the first two displays. Starting at
a segment length of 30 m and higher, USB is only available up to a maximum of 40 m for the first
display. USB devices can only be connected directly to the Automation Panel 900 (without hub).
3.3.1 Basic system requirements
The following table displays the possible combinations for the APC620 system unit with CPU
board to implement the configuration shown in the figure above. If the maximum resolution is
limited when making the combination then it is also shown in this table (e.g. for connecting a non-
B&R Automation Panel 900 device).
Figure 89: Configuration - Four Automation Panels 900 units via SDL on one line
CPU board
with system unit Limitation
Resolution
5PC600.SX01-00 5PC600.SX02-00 5PC600.SX02-01 5PC600.SX05-00 5PC600.SX05-01
5PC600.E855-00
✓ ✓ ✓ ✓ ✓
Max. UXGA
5PC600.E855-01
✓ ✓ ✓ ✓ ✓
Max. UXGA
5PC600.E855-02
✓ ✓ ✓ ✓ ✓
Max. UXGA
5PC600.E855-03
✓ ✓ ✓ ✓ ✓
Max. UXGA
5PC600.E855-04
✓ ✓ ✓ ✓ ✓
Max. UXGA
5PC600.E855-05
✓ ✓ ✓ ✓ ✓
Max. UXGA
Table 109: Possible combinations of system unit and CPU board
Automation PC 620
with AP Link
5AC600.SDL0-00
SDL segment
max. 40 m
Link: 5DLSDL.1000-01
USB
not possible
Link: 5DLSDL.1000-01
✓
USB OK
0
2
Graphics Engine 2
x Internal APC620 panel number
Link: 5DLSDL.1000-01
✓
1
Link: 5DLSDL.1000-00
3
SDL segment
max. 40 m
SDL segment
max.
40 m
SDL segment
max. 40 m
USB
not possible
USB
possible
Monitor / Panel
connection