B&R Industries Automation PC 620, Руководство пользователя

Страница: 180 / 512

180
Commissioning • Connection examples - Automation Panel 900
Automation PC 620 User's Manual V 1.90
3.2 Configuration - One Automation Panel via SDL
An Automation Panel is connected to the integrated SDL interface via an SDL cable. USB
devices can only be connected directly to the Automation Panel (without hub).
3.2.1 Basic system requirements
The following table displays the possible combinations for the APC620 system unit with CPU
board to implement the configuration shown in the figure above. If the maximum resolution is
limited when making the combination then it is also shown in this table (e.g. for connecting a non-
B&R Automation Panel 900 device).
3.2.2 Link modules
Figure 88: Configuration - one Automation Panel via SDL
CPU board
with system unit Limitation
Resolution
5PC600.SX01-00 5PC600.SX02-00 5PC600.SX02-01 5PC600.SX05-00 5PC600.SX05-01
5PC600.E855-00
✓ ✓ ✓ ✓ ✓
Max. UXGA
5PC600.E855-01
✓ ✓ ✓ ✓ ✓
Max. UXGA
5PC600.E855-02
✓ ✓ ✓ ✓ ✓
Max. UXGA
5PC600.E855-03
✓ ✓ ✓ ✓ ✓
Max. UXGA
5PC600.E855-04
✓ ✓ ✓ ✓ ✓
Max. UXGA
5PC600.E855-05
✓ ✓ ✓ ✓ ✓
Max. UXGA
Table 103: Possible combinations of system unit and CPU board
Model number Description Note
5DLSDL.1000-00 Automation Panel Link SDL Receiver for Automation Panel
900
Table 104: Link module for the configuration - One Automation Panel via SDL
Automation PC 620
SDL segment length
max. 40 meters
Link: 5DLSDL.1000-00
✓
USB OK
0
Graphics Engine 2
x
Internal APC620 panel number
Monitor / Panel
connection