Baicells Neutrino-224, Руководство по установке

Страница: 77 / 86

77
Table 5-31: Log Config
Parameter Name Description
LTE log level (Figure 5-50):
L2 log level
L2 log level is not used in Release 2.x.x or later
RRC log level RRC log level
oamAdapter log level OAM adapter log level
RRM log level RRM log level
SON log level SON log level
OAM log level OAM logs log level
phyTraceSubsystemConfig (Figure 5-50):
Subsystem
Select the subsystem.
streamToRemoteHost Indicates whether logs from this subsystem will be logged to
the remote host
logToFile Indicates whether logs from this subsystem will be logged to
the local file
forwardPort User Datagram Protocol (UDP) port number used for remote
logging
separateLog Indicates whether to log this subsystem separately. Needed
only when logToFile is
true . For LTE_L1 and LTE_L2 this must be
true.
logFileSize The size of a single log file. No checking is done on
whether the file system has enough free space to hold the logs.
logFileCount Number of logs, including the current one, to keep. Is used for
rotation.
logFileComp Compression level for the log files. Recommend leaving the
default value.
mmsgCount Number of messages to pull at a time using recvmmsg .
Recommend leaving the default value.
phyTraceConfig (Figure 5-51):
forwardIPAddr
Set the IP address of the remote host.
collectStats If set to false, stats of the log system will not be collected
l1LogType Determines whether to log l1 to binary or just pcap or to
include all headers(pcap/eth/ip/udp). Only ALL_HEADERS is
supported currently.
wiresharkEnabled Indicates whether or not wireshark capture is enabled for
signaling(UU/S1AP/X2AP).
phyTraceNetworkCaptureConfig (Figure 5-52):
Interface Name of the network interface
PcapFilter Filter to apply while capturing Packet Capture ( pcap) packets.
Any updates to the filter will take effect the next time the
interface is enabled again.
Example: sctp port 36412 or sctp port 36422
Range: 1 to 256 digits