Baicells Neutrino-224, Руководство по установке

Страница: 29 / 86

29
Figure 5-8: Host
Table 5-6: Host
Parameter Name Description
Host Name Host server name. Range: 0-63 digits.
Time Zone Located time zone of the host server.
Range: -12 to 12.
dnsOnBoot Enable or disable Domain Name Server (DNS) function.
DNS Address
For DNS 1 – 8:
Enable or disable the DNS server (#). If enabled, enter the IP
address for the host server.
Note: If it is an IPv6 address, select the check box.
5.2.5 IPSec
In the presence of an IP Security (IPSec) gateway, the security protocols are provided in the
network layer to ensure the safety of transmissions. The system enables the IPSec function by
default and supports the configuration of one IPSec tunnel. Operators can modify the IPSec
server configuration based on their specific requirements. Follow the steps in this section to
configure IPSec.
1. Go to Network > IPSec to enter the IPSec configuration page, as shown in Figure 5-9.