Baicells Neutrino-224, Руководство по установке

Страница: 52 / 86

52
5.5.1.4.1 Neigh Freq List
1. In the eNB GUI go to LTE Setting > 3G Freq/Cell (Figure 5-27).
Figure 5-27: 3G Freq/Cell
2. Under Neigh Freq List , click on the Add icon to add the neighboring 3G eNBs’
frequencies (up to 12). Each field is described in Table 5-15. Click on Save after setting
the values.
Table 5-15: Neigh Freq List
Parameter Name Description
utraCarrierArfcn Frequency point of the neighbor frequency
qRxLevMin Minimum access level. Only if the received signal power
measured by the UE is higher than this threshold, can the UE
connect to this cell.
qQualMin The threshold for the lowest access.
Range: -24 to 0.
Reselection Priority Priority of the reselection to cells at this frequency
threshXHigh Reselection threshold for higher priority inter-band
frequencies. This parameter represents the access threshold
level at which the UE will leave the serving cell and reselect
another cell at the target frequency, given that the target
frequency cell has a cell reselection priority higher than the
serving one
threshXLow Reselection threshold for lower priority inter-band
frequencies.
This parameter represents the access threshold level at which
the UE will leave the serving cell and reselect another cell at
the target frequency, given that the target frequency cell has
an absolute priority lower than the serving one.
pMaxUtra Maximum transmit power a UE is allowed to use in the uplink.
The purpose is to limit the transmit power of UEs within this
cell.
threshServingHighqR9 High RSRQ threshold of priority reselection.
Range: 0 to 31.