249
Replacement of the wheel with fault
5
E
m
erg
en
cy
tr
ea
tm
en
t
Caution
●
Spare wheel rim sizes and tire sizes may
be different from those of the damaged
wheels. After installing the spare wheel,
the vehicle controllability will change.
Please reasonably control the vehicle
speed, avoid sharp acceleration and
emergency braking.
●
Spare wheel can only be used in short
term. Don’t let the vehicle speed exceed
80km/h.
●
Do not use 2 or more spare wheels when
traveling.
Preparatory work
If the tire burst, puncture, bulge, leakage, and
other phenomena exist, you should drive slowly
to a flat place where safe operation can be carried
out to replace the spare wheel, to avoid further
damage to tires and rims. Turn on the hazard
warning light at the same time and place the
warning triangle in a predetermined distance
behind the vehicle.
Warning
It is dangerous to replace the wheel. The
vehicle may slide down from the jack,
overturn, and hold the operator or others
down, causing serious injury or death.
Replace the wheel in a safe flat place.
Please strictly comply with the relevant
regulations. All occupants shall leave the
vehicle and wait in a safe place.
In order to prevent the vehicle from
moving, please take the following
measures:
●
Pull up the parking brake to apply
parking brake.
●
Place the shift lever to gear "P".
(Models with CVT transmission)
●
Shut down the engine, and do not start
the engine during vehicle lifting process.
●
Do not allow any person to leave in the
vehicle.
Remove the wheel with fault
1. Place appropriate stoppers in front and rear of
the wheel which is in diagonal to the wheel with
fault, to prevent vehicle movement when jacked
up.
