Starting and Driving
156
3
T
he
dr
ivi
ng
g
ui
de
General descriptions
Vehicle is equipped with electronic anti-theft
function, which is used to prevent the illegal
starting the vehicle. Transceiver chip inside the
key is equipped with an electronic code, which is
sent to the vehicle when the engine is started.
Only when the electronic code sent by the
transceiver chip matches with the electronic code
stored in the vehicle, the engine can be started. If
you use a key (or other tools) with wrong
electronic code, the engine cannot be started.
Keyless start/stop button
Keyless start/stop button is on the instrument
panel in the lower right of the steering wheel.
Power mode switch
Models with CVT transmission: place the shift
lever to gear "P" or gear "N", without depressing
the brake pedal; models with manual
transmission: When the clutch pedal is not
depressed. Press the keyless start/stop button, the
power modes will be switched in the following
order:
●
When the button is not pressed: Keyless
start/stop button is off, then it is "OFF" mode (the
indicator light on the button light does not go on);
●
When the button is pressed for the first time:
Go to "RUN" mode indicator light on the button
is green), the instrument cluster goes on, all
electrical devices are in the ON state;
●
When the button is pressed for the second time:
Switch to the "ACC" mode (red INDICATOR
LIGHT on the button), circuits of CD and other
accessories are connected. In this mode, if you
open the driver's door, the power mode returns to
the "OFF" mode (the indicator light on the button
goes on);
●
When the button is pressed for the third time:
Return to "OFF" mode (the indicator light on the
button goes off).
Successively press the keyless start/stop button,
and then you can switch among the "OFF"
→
"RUN"
→
"ACC" modes.
