55
Instrument and control mechanism
2
O
pe
ra
ting
sy
ste
m
a
nd e
qui
pm
ent
26. Driver seat belt not fastening warning light
(red)
After the vehicle is powered, if driver does not
fasten the seat belt, the warning light goes on.
When the seat belt is not fastened, if the speed is
more than 25km/h or traveling time is more than
60s or traveled distance is over 300m, the seat
belt not fastening warning light will flash
accompanied by 120s of sound alert. After 120s,
the seat belt not fastening warning light still
remains ON, but the sound alert will stop.
27. Fuel warning light
(yellow)
When keyless start/stop button is in the "RUN"
mode, the light remains ON to check by itself,
and goes out after self-test.
If the warning light goes on, it indicates that the
remaining amount of fuel is less, and you should
add fuel. If the warning light flashes, it indicates
that the fuel sensor has a fault, while the fuel
gauge does not indicate properly. Please contact
the authorized dealer of BAIC for repair.
28. Parking brake indicator light
(red)
When keyless start/stop button is in the "RUN"
mode, the light remains ON to check by itself.
After self-test. If pull up the EPB, the indicator
light goes on, if not pull up the EPB, the indicator
light goes out.
Warning
●
If the warning light is still ON after the
parking brake is released, you should stop
immediately in the premise of safety, and
contact the authorized dealer of BAIC for
repair as soon as possible.
29. Cruise control switch indicator light
(green)
When the light flashes at frequency of 2Hz, it
indicates that Cruise control function is turned on.
When the indicator light remains on, it indicates
that it has entered into Cruise control state.
30. Parking brake warning light
(yellow)
When keyless start/stop button is in the "RUN"
mode, the light remains ON to check by itself,
and goes out after self-test. When EPB system
has a fault, warning light goes on, please contact
the authorized dealer of BAIC for repair as soon
as possible.
31. Keyless start fault warning light
(red)
It indicates the PEPS system warning
information. When the light goes on, it may
occur some conditions as below:
①No smart key found. ②Smart key is forgotten
inside the car.
③Smart key is not inside the
car.
④ Smart key does not have
enough power.
⑤please put the smart key close to emergence
start zone.
32. Electric steering column clock indicator light
(red)
It indicates the ESCL system warning
information. When the light goes on, it may
occur some conditions as below:
①Steering col
umn lock has a fault, it need to
stop to check.
②Prompt the driver to turn the
steering wheel.
③Steering column lock unlock
failed.
