181
Parking Radar and Reversing Image System
3
T
he
dr
ivi
ng
g
ui
de
Parking radar system Display of instrument
cluster
The parking radar system has two configurations:
one is that only 3 rear parking radar sensors are
installed on the rear bumper; the other is that not
only 3 rear parking radar sensors are installed on
the rear bumper, but also 2 front parking radar
sensors are mounted on the front bumper.
Parking radar system is a safety assist device
when parking or reversing the vehicle. It uses
ultrasonic to detect the approximate distance
between the vehicle and the obstacle, displays
with the trip computer screen, and alerts the
driver by intermittent sound signal
When the parking radar works, the trip computer
screen will enter into parking radar display
interface, the front two and rear four sections of
lines on the screen represent an the orientation
and distance to the vehicle of the obstacle, while
sending out beep warning.
Where is the obstacle in the radar detection area,
the line of the corresponding area is lighted, and
when there is no obstacle behind the vehicle,
the wireless line is lighted. As the obstacles get
closer to the bumper, the buzzer will buzz more
and more rapidly until it continues to buzz,
reminding the driver to pay attention to the
obstacles behind
Rear parking radar on condition (only
equipped with rear parking radar models)
When the keyless start/stop button is in "RUN"
mode, place the shift lever to gear "R", the rear
parking radar is turned on, and place the shift
lever to gear "R" to exit the rear parking radar
Front and rear parking radar on condition
(equipped front and rear parking radar
models)
When the keyless start/stop button
is in
"RUN" mode, press the button on the Multi-
function switch panel or place the shift lever in
gear "R", the front and rear parking radar is
turned on, and then the indicator light on the
button goes on.
When the vehicle traveling speed is larger than
15km/h or press the button
again, the front
and rear parking radar is turned off, and then the
indicator light on the button goes out
