Windshield washer and wiper
230
4
M
ain
ten
an
ce a
nd
S
erv
ice
4. Hold the wiper blade and remove it by moving
slightly in the direction of the arrow.
Caution
●
After removing the wiper blade, you
should be very careful, and place a thick
towel in the lower part of the wiper arm to
prevent damage to windshield because the
wiper arm accidentally bounce back.
5. Replace with new wiper blade
6. Block the wiper blade wiper arm up ward into
the groove and it indicates it is installed in place
when you hear the "click" sound.
7. Check the wiper blade installation is reliable,
remove the towel, place the wiper arm gently
back into place.
Rear windshield wiper blade replacement
method
Wiper blades and wiper brush holder are replaced
at the same time:
1. Lift the wiper arm away from the windshield,
put a thick towel in the lower part of the wiper
arm, to prevent accidental damage to the
windshield due to wiper arm bouncing back.
2. Hold the wiper brush holder, rotate
counterclockwise to the limit position, and then
continue to rotate until you hear a "click" sound,
then the wiper brush holder disengage from c the
wiper arm.
