Bacharach 67-7622, Инструкция по установке и эксплуатации

Страница: 32 / 96

Page 3-6
Bacharach, Inc.
Instructions 67-9319
OPERATION INJECTOR CALIBRATOR CD3
3.1.5.2 Clamping Body to Seat
6. Lift the pulley cover to expose the camshaft
pulleys and flywheel.
7. Rotate flywheel by hand until the white paint-
ed area on the flywheel shows through the
window (the barring tool inserted in a hole in
flywheel can help in turning the flywheel).
NOTE: If the painted area does not appear
in the window, body to seat clamping can
not be accomplished.
8. Close the pulley cover. Cover must be closed for
the main drive motor to operate.
9. To clamp the injector, press and hold down the
HOLD TO OPERATE button.
10. Press the BODY TO SEAT CLAMP button.
The air cylinders will retract and clamp the
injector.
11. Release BODY TO SEAT CLAMP button when
the BODY TO SEAT monitor turns green.
3.1.5.3 Clamping Plunger to Body
CAUTION
Clamping force influences fuel delivery.
Follow these instructions carefully.
12. Continue to hold the HOLD TO OPERATE
button with left hand.
13. While holding down the HOLD TO OPERATE
button, move the CLAMP/UNCLAMP lever to
the CLAMP position with right hand.
Maximum clamping force shown on the CLAMP
MONITOR/TIMING plunger to body gauge will be
in the green segment and TIMING light will be lit.
14. Wait until the plunger to body TIMING light
goes out (after about 3 seconds).
Figure 3-12. Body to Seat Clamp
Figure 3-13. Timing Light & Clamp Monitors
Figure 3-14. Plunger to Body Clamp
13
CLAMP
12
HOLD TO OPERATE
13
Plunger to Body
Clamp Monitor
14
Plunger to Body Timing Light
11
Body to Seat
Clamp Monitor
10
BODY TO SEAT CLAMP
9 HOLD TO OPERATE