Avocent AV Works, Инструкция по установке и эксплуатации

Страница: 89 / 144

Chapter 6: AVR AMP 77
not attached to anything, the menu will display None . When an AVRIQ module is selected, its
firmware information appears in the Information box.
4. Compare the current information to the Firmware Available box to see the firmware upgrade
available for the AVRIQ module. (You may load firmware even if the current and available
versions are the same.) Click the
Load Firmware button.
5. The firmware upgrade begins. During the upgrade, progress messages are displayed below the
Firmware Available box. When the upgrade is finished, a message will either indicate that the
upgrade was successful or provide the reason for failure.
6. Repeat steps 2-5 for each AVRIQ module to upgrade. Multiple individual AVRIQ module
firmware upgrades may be done in parallel.
7. When finished, click OK .
Rebooting the Switch
The Reboot Appliance tool instructs the switch to reboot. The switch will broadcast a disconnect
message to all client connections before rebooting.
To reboot your switch:
1. Click the Tools tab in the AVR AMP.
2. Click the Reboot Appliance button. A message prompts you to confirm the reboot. Click Yes to
confirm the request. The switch will notify each attached client, then it will reboot.
3. The AMP will close.
Managing the Appliance Configuration Database
All switch settings are stored in an appliance configuration database. (User account information is stored
in a user database; see
Managing the Appliance User Database on page 78 for more information.)
Saving an appliance configuration database
The Save Appliance Configuration tool saves the configuration database from the switch to a file
on the system running AVWorks software.
NOTE: The file is encrypted during the save process, and you will be prompted to create a password when you
save the database. You will need to enter this password when you restore the file.
To save a configuration from an appliance to a file:
1. Click the Tools tab in the AVR AMP.
2. Click the Save Appliance Configuration button. The Save Appliance Configuration dialog
box appears.
3. Click Browse and navigate to a location to save the configuration file. The location appears in
the Save To field.