Avocent AV Works, Инструкция по установке и эксплуатации

Страница: 77 / 144

65
CHAPTER
6
AVR AMP
About the AVR AMP
After you add an AutoView 1000R/2000R (AVR) switch in the AVWorks cross-platform
management application, you may view and configure unit parameters, view and control active
video sessions and execute a variety of control functions. These operations are accomplished
through the AVR Appliance Management Panel (AMP).
The AVR AMP has three tabs: Settings, Status and Tools, as follows:
•
The Settings panel contains categories in the left portion of the panel. Categories with a pre-
ceding plus sign (+) have subcategories. The content of the remaining area of the panel
changes according to the category or subcategory that is selected.
Settings categories include general appliance information, user accounts, SNMP and other unit
configuration information.
• The Status panel displays information about currently active Video Viewer sessions. You may
disconnect sessions from this panel.
• The Tools panel allows you to execute control functions on the appliance such as rebooting,
saving/restoring databases and upgrading firmware.
Some operations that you initiate through the AVR AMP will trigger a dialog box indicating that a
reboot is required in order for the change to take effect. In such cases, you may choose to reboot
immediately or wait to reboot later.
NOTE: References to the local user refer to an OSCAR user connected to the appliance.
For more information about the appliance and its operations, see the AutoView 1000R/2000R
Installer/User Guide.
To access the AMP:
1. Click the Appliances tab in the Explorer.
2. Double-click on an AutoView 1000R/2000R switch in the Unit list.
-or-
Select an AutoView 1000R/2000R switch from the Unit list, then click the
Manage Appliance
task button.
-or-