Avocent AV Works, Инструкция по установке и эксплуатации

Страница: 33 / 144

Chapter 3: AVWorks Explorer 21
For more information, see Customizing Properties on page 23 and Customizing Options on
page 27.
If a device is connected to a CCM appliance that has SSH enabled:
•
The Serial Console Viewer Telnet client will use a direct connection to the port.
• Third party Telnet clients will be launched on top of an SSH tunnel.
To configure Serial Console Viewer access to a device through the CCM appliance:
NOTE: Serial Console Viewer access is enabled by default. The following procedure is provided in the event you
configure another access method and later wish to return to using this method.
1. To configure the Serial Console Viewer as the global default access method:
a. Select Tools - Options from the Explorer menu.
b. Click the Telnet tab.
c. Enable the Launch built-in application checkbox.
d. Click OK to save the settings.
2. If the global default is set for a method other than the built-in application, and you wish to
override it for this device:
a.
Select a unit from the Unit list.
b. Select View - Properties from the Explorer menu.
-or-
Click the
Properties task button.
-or-
Right-click on the unit. Select
Properties from the pop-up menu.
The Properties dialog box appears.
c. Enable the Launch built-in application checkbox.
3. Click OK to save the settings.
To configure third party Telnet access to a device through the CCM appliance:
1. To configure a third party Telnet application as the global default access method:
a. Select Tools - Options from the Explorer menu.
b. Click the Telnet tab.
c. Enable the Launch user-specified application checkbox. Enter the directory path, name
and any command line arguments. For commands that do not provide a GUI, enable the
Launch in command window checkbox.
d. Click OK to save the changes.
2. If the global default is set for a method other than that user-specified Telnet application, and
you wish to override it for this device:
a.
Select a unit from the Unit list.