Avocent AV Works, Инструкция по установке и эксплуатации

Страница: 105 / 144

Chapter 7: CCM AMP 93
To modify an alert string:
a.
Select the string in the Alert Strings list. The selected string will appear in the text box
under the list.
b. Modify the alert string in the text box.
c.
When complete, click the Check Mark button next to the text box.
To delete an alert string:
a.
Select the string in the Alert Strings list.
b. Click the X button below the list.
To copy all the alert strings defined for one port to another port or to all other ports:
a.
In the Server pull-down menu, select the port from which to copy the alert strings. That
port’s alert strings will be listed.
b. From the Copy To pull-down menu, select the port to which the alert strings will be copied.
-or-
Select
All , which will copy the alert string to all ports on this CCM appliance.
c. Click the Copy button. You are prompted to confirm the copy operation.
d. Click Yes to confirm the copy.
-or-
Click
No to cancel the copy.
5. Click Apply to save any changes without exiting the AMP.
-or-
Click
OK to save any changes and exit the AMP.
-or-
Click
Cancel to exit the AMP without saving any changes.
Viewing Port Statistics
The Ports - Statistics subcategory displays CCM port statistics and EIA signal settings, as follows:
•
The Port and Name columns contain the port’s number and name. The display for the
dedicated CLI port in a CCMx50 appliance contains the name “CLI” with no port number.
• The Tx Bytes and Rx Bytes columns indicate the number of bytes transmitted and received.
• The Errors column indicates the number of errors.
• The Power Status column indicates the port’s power status. The possible values are:
On = Power on
*On = Power on and value toggled since last poll
Off = Power off *Off = Power off and value toggled since last poll