Avocent AV Works, Инструкция по установке и эксплуатации

Страница: 58 / 144

46 AVWorks Installer/User Guide
To send a macro:
Select Macros - <desired macro> from the Video Viewer menu.
- or-
Select
Macros - Configure from the Video Viewer menu. The Macros dialog box appears. Select
the desired macro from the Defined Macros list and then click Run .
To create or edit a macro:
1. Select Macros - Configure from the Video Viewer menu. The Macros dialog box appears.
2. To create a macro, click Create .
-or-
To edit a macro, click
Edit .
The Create Macro or Edit Macro dialog box appears.
3. If you are creating a macro, type a 1-32 character name in the Macro Name field.
4. To build the macro, you may select keystrokes from a set of categories, or type the keystroke
definitions. The categories contain many commonly-used keystrokes, and provide an easy
alternative to typing the keystroke definitions.
To build the macro from the categories, select a category in the Available Keystrokes pull-
down menu and then select keystrokes from the adjacent pull-down menu, clicking
Add after
each keystroke selection. The selected keystrokes appear in the Keystrokes field.
To build the macro by typing the keystroke definitions, enter the text in the Keystrokes field,
as follows:
•
Letters and numbers may be entered without additional symbols.
• To specify a keystroke such as
Enter
or
Home
, type the name of the keystroke and sur-
round that text with a less than (<) and greater than (>) symbol (for example, <
Enter
> ).
• To specify auxiliary keystrokes such as
Control
,
Shift
or
Alt
, where the command requires
a press, hold and release, type the initial press keystroke (for example, <
Ctrl-Press
> ),
then type the name of the keystroke, letter or number of the command, followed by the
closing release (for example,
<
Ctrl-Release
> ).
5. Click OK to accept the changes and return to the Macros dialog box.
-or-
Click
Reset to erase all the keystrokes entered in the Keystrokes field.
6. Click Close to exit the Macros dialog box.
To delete a macro:
1. Select Macros - Configure from the Video Viewer menu. The Macros dialog box appears.
2. Select a macro in the Defined Macros list, then click the Delete button. You are prompted to
confirm the deletion.